top of page

30 MW Grid Connected PV System in MATLAB

30 MW Grid Connected PV System in MATLAB

This video explain the design of boost converter, concept of MPPT, design of inverter and concept of inverter control for 30 MW grid connected PV system in MATLAB. The simulation results for varying irradiance conditions are also analyzed in this 30 MW grid connected PV system in MATLAB. The THD (Total Harmonic Distortion) of the grid current and inverter current are analyzed and it was less than 1 % only and obey the IEEE standards for the all irradiance conditions.



Introduction

The renewable energy sector has seen exponential growth in recent years, with solar energy being one of the most popular sources. Photovoltaic (PV) systems have become a vital part of the solar industry due to their cost-effectiveness and ease of installation. In this article, we will explore the design and simulation of a 30 MW grid-connected PV system using MATLAB.

Design of a 30 MW Grid Connected PV System

Overview of the PV System

A PV system comprises of various components such as solar panels, inverters, and transformers, which work together to convert sunlight into electricity. In the case of a grid-connected PV system, the electricity generated is supplied to the grid and used to power homes and businesses. The following are the main components of a grid-connected PV system:

Solar Panels

Solar panels are the primary component of a PV system, and their job is to convert sunlight into electricity. The solar panels are made up of photovoltaic cells, which generate a direct current (DC) when exposed to sunlight.

Inverters

Inverters are used to convert the DC generated by the solar panels into alternating current (AC), which is used to power homes and businesses. Inverters also ensure that the electricity supplied to the grid is in sync with the grid's frequency and voltage.

Transformers

Transformers are used to step up or step down the voltage of the electricity generated by the PV system. The voltage needs to be stepped up before it is supplied to the grid and stepped down before it is used to power homes and businesses.

Simulation of the PV System

Modeling the PV Array

The first step in simulating a PV system is to model the PV array. This can be done using MATLAB's built-in PV array model. The PV array model considers various factors such as the number of solar panels, the orientation of the panels, and the location of the PV system.

Modeling the Inverter

The next step is to model the inverter. MATLAB's SimPowerSystems toolbox has various models of inverters that can be used for simulation. The inverter model considers various factors such as the inverter's efficiency, its maximum power output, and its control strategy.

Modeling the Transformer

The final step is to model the transformer. MATLAB's SimPowerSystems toolbox also has various models of transformers that can be used for simulation. The transformer model considers various factors such as the transformer's efficiency and its winding configuration.

Simulation Results

Once the PV array, inverter, and transformer models have been created, the simulation can be run. The simulation results provide valuable information such as the power output of the PV system, the efficiency of the inverter, and the voltage and current of the electricity supplied to the grid.

Conclusion

The design and simulation of a 30 MW grid-connected PV system using MATLAB can provide valuable insights into the performance and efficiency of the system. By modeling the PV array, inverter, and transformer, we can determine the power output of the system and its compliance with the grid's frequency and voltage. The simulation results can be used to optimize the design of the system and improve its overall performance.

FAQs

  1. What is a grid-connected PV system? A grid-connected PV system is a solar power system that is connected to the electrical grid and supplies excess electricity generated by the system to the grid.

  2. What are the main components of a grid-connected PV system? The main components of a grid-connected PV system are solar panels, inverters, and transformers.

  3. What is the purpose of an inverter in a PV system? The purpose of an inverter in a PV system is to convert the DC generated by the solar panels into AC.

8 views0 comments

Comentários


bottom of page